Toyota Camry SE XLE Rear Backup Camera Kit for 2012, 2013, 2014
Camry 2012-2014 SE/XLE models have backup camera interface prewired from radio to center console. The prewired feature allows the backup camera installation much easier because of no need to remove the radio.
This backup camera kit is designed for Toyota Camry 2012-2014 SE/XLE, simple plug and play without cutting factory wires.
HD backup camera for Toyota vehicles, with high clarity for both day and night
Custom designed 6 volt camera working voltage to work with TOYOTA 6 volt radio output voltage.
Harness to center console plug
Lens Angle: 170 Degree
Resolution: 520 TV Lines
Night vision Min. illumination: 0.01Lux/F1.2
Voltage: 6 V
Operating Temp.: -30C to 75C
Reference Lines: On/off
Shutter Speed: 1/60s - 1/100,000 s
Pixels: 720(H) x 576(V)
No need to remove the radio. (the harness does not match the receptacle at back of radio, only go to the receptacle under the center console)
If you plan to install the harness to the radio, please see our other Toyota cameras that have a harness that plug in behind the radio.
I finally had the chance to install this. Surprisingly easy and works perfectly. Less than two hours to install. I unbolted drivers seat and ran the wire under carpet into center console area. Way easier and faster too. Great product and I’m telling everyone I know about your stuff. Thank you!
Camera works fine. Wiring diagram was okay, there was no indication of the black wire that was strung with the red wire to the voltage reducer. I'm happy with the purchase. A package of wire ties would have been a nice installation addition though. The hole saw worked perfectly.
Easy install, drill bit included for camera mount hole, Works great! I added LED backup bulbs so works great at night also.