Ford F-Series truck F150, F250, F350 HD backup camera with Night Vision Technology - OEM Ford Bezel, replaces factory tailgate emblem
OE style factory emblem camera for Ford F-Series truck Can be used as a front view camera
F150, F250, F350 backup camera with Night Vision Technology - OEM Ford Bezel, replaces factory tailgate emblem
This will fit any Ford with the large blue oval in the center of the tailgate (2005 and up).
Factory Ford tailgate nameplate/camera mount
Factory Ford blue oval emblem
Camera with night vision technology and selectable distance lines
OEM Ford mounting bolts
Detailed installation instructions
Factory Style Custom Ford Camera Ultra HD CMOS Sensor with NightVision Technology
28 Foot Male to Male RCA Video Cable with reverse power output trigger wire
Selectable Parking Guidance Line
Engineered ABS Housing
Resolution (TV LINES): 480
Minimum illumination: <0.1 Lux
Working Voltage: 9-16V
Operating Temp: -22-+176°F
Video System: NTSC (Color)
This kit allows you to see what is directly behind the truck - it will even see the rear bumper and hitch. No monitor or mirror is included in this kit.
This camera can be connected to your factory Ford navigation or any aftermarket monitor with an RCA input. A Lockpick kit is required if connecting to your factory navigation
Your factory tailgate blue oval is held on with two sided tape, use a heat gun and the included fishing line to work the old emblem off the surface of the tailgate. On older models you will need to drill an access hole for the camera to pass through the surface of the tailgate. On the bottom of the tailgate there is a square water drain that can be used to pass camera harness through. Most 2006 and newer models may already have the required holes so no drilling would be required in this case.The wire harness has a single point weather resistant connection that connects to the camera near the spare tire under the truck - allows for easy tailgate removal! The harness is 28' long so all connections can be made inside the cab.
I received the camera in a reasonable amount of time, I installed the camera in about 2 hours, install was not difficult, if you have the proper tools, picture looks fantastic in my aftermarket stereo.